FRP extruded profiles

There are many types of fiberglass extruded profiles, including fiberglass round pipes, fiberglass square pipes, fiberglass rectangular pipes, fiberglass round rods, fiberglass I-beams, fiberglass channel steel, fiberglass angle steel, fiberglass marker piles, fiberglass guardrails, fiberglass ladders, fiberglass floor support beams, fiberglass extruded grids, fiberglass brackets, and cable trays.

The basic components of extruded fiberglass profiles are resin and fiberglass (including cloth, felt, etc.), which are reinforced with fibers (including fiberglass, carbon fiber, organic fiber, and other metal and non-metallic fibers), and bonded with resins (mainly epoxy resin, polyester resin, phenolic resin), It is compounded with other auxiliary materials (main auxiliary materials: release agent, curing agent, catalyst, sealing agent, UV light stabilizer, mold cleaning water, gel coat, etc.). It has a series of excellent characteristics such as high temperature resistance, corrosion resistance, high strength, small specific gravity, low moisture absorption, small elongation, and good insulation.

Characteristics and properties of Shengrun fiberglass extruded profiles

1. Good dimensional stability

The thermosetting resin matrix undergoes cross-linking during the processing process to form a network like structure. The product has good dimensional stability under normal conditions, and the post shrinkage after molding is also small. The shape and size of the product undergo minimal changes under long-term continuous loading, resulting in minimal creep. Its creep performance depends on factors such as the size of the load, temperature, and loading time. Under fixed load and temperature conditions, the creep of thermosetting plastics after long-term loading is much smaller than that of thermoplastic plastics.

2. Superior heat and high temperature resistance characteristics

After curing, thermosetting resin based composite materials can no longer soften, and their products have relatively stable heat resistance. When measured under a load of 1.86MPa, their thermal deformation temperature is generally within 150~260 ℃. Fiber reinforced thermosetting plastics are excellent insulation materials, with thermal conductivity generally ranging from 0.35 to 0.47W/(m.K). Only 1/100 to 1/1000 of metals can be used as good insulation materials and instant high-temperature resistant materials, The thermal deformation temperature of the material can reach 350 ℃, which can be used as both room temperature and high temperature structural materials. Glass fiber/phenolic is an excellent insulation material for rocket and missile engines.

3. Excellent electrical performance

Composite materials are excellent electrical insulation materials. Products made with mica as filler have better electrical properties and can be used to manufacture special components with superior arc resistance, voltage resistance, and induction resistance. Due to the excellent electrical properties of composite materials, their products are free from electrochemical corrosion and stray current corrosion, and can be widely used in the manufacturing of insulation components in instruments, motors, and electrical appliances to improve the reliability of electrical equipment and extend its service life. In addition, the products have good dielectric properties and microwave transmittance under high-frequency conditions, and have been used to manufacture various high-frequency insulation products such as radar hoods.

4. Corrosion resistance

The electrochemical corrosion mechanism of resin based composite materials is different from that of ordinary steel. It is non-conductive and does not dissolve ions in dielectric solutions. Therefore, it has good chemical stability to atmospheric, water, and general concentrations of acids, alkalis, salts, and other media, especially in non oxidizing strong acids and quite a wide range of applications)